Home > Brands > Audio-Technica
Enquire Now
Enquire now to purchase 01892 532 995
Audio Technica AT33PTGII Dual Moving Coil Cartridge with Microlinear Stylus
Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge. High performance and long-life Microlinear stylus
Microlinear (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours .
Type: Dual Moving CoilMounting: 1/2" CentersFrequency Response: 15 - 50,000HzBody Material: Aluminium/Synthetic ResinChannel Separation: 30dB (1kHz)Output Channel Balance: 1dB (1kHz)Output Voltage: 0.3mV (1kHz and 5cm/sec.)Vertical Tracking Angle: 23°Vertical Tracking Force Range: 1.8 - 2.2g (2.0g standard)Stylus Shape: MicrolinearStylus Curvature Radius: Micro linearStylus Construction: Nude Square ShankCantilever: Gold-plated solid boronCoil Impedance: 10Ω (1kHz)Coil Inductance: 22µH (1kHz)DC Resistance: 10ΩStatic Compliance: 40×10-6cm/dyneDynamic Compliance: 10×10-6cm/dyne (100Hz)Terminal Pins: BrassRecommended Load Impedance: Min 100ΩWeight: 6.9gDimensions: H16×W16.6×D26.5mmReplacement Stylus: When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.Accessories Included: 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)
Be the first to Write a Review for this item!
Fill in the form below to reserve this item for purchase in store.
If you have seen one of our products cheaper elsewhere, let us know. We will check it out and match the price. Simply fill in the following form and click 'Submit' to send it to our staff.
Speak to an expert 01892 532 995 Mon - Sat 9am - 5.30pm