Are you outside the UK? We also ship to  Europe  USA  CanadaMore info Got it

Tom Evans Pulse 2 Power Supply Pre Amplifier & Power Supply

Tom Evans Pulse 2 Power Supply Pre Amplifier & Power Supply
  Zoom
£2,500.00
(£2,083.33 Exc. VAT)
Finish Options:  
  

Shipping, 2-3 days

Availability

Enquire now to purchase 01892 532 995

Free standard next day delivery
  • 5 pairs of switched line inputs
  • 1 pair of buffered record outputs
  • 2 pairs of outputs to power amplifiers
  • Proprietary 'Lithos' regulation (unique to Tom Evans products)
Tom Evans
Secured by Thawte

Why buy from us?

Tom Evans Pulse 2 Power Supply

The role of a preamplifier is to act as a switch controlling the signals from the various source components in a system, and to provide adjustable gain to the power amplifiers. On the face of it, a straightforward task-a switch, a volume control, and a modest amplifying stage. A classic case of easier said than done.

We must not forget that anything added to(or left out of) the signal by the preamp is necessarily going to be increased by 20-35dB in the power amps.

The output stage utilises current feedback technology. This approach is superior to voltage feedback designs as it offers far greater rise and recovery times (less than 10 nanoseconds). Using conventional voltage regulation, this approach is rarely used as power supply related noise creates a marked reduction in resolution and dynamic range. Historically feedback has been used to solve problems of inadequate circuit design. This is certainly the case using conventional technology.

Intelligent use of feedback is a key feature of producing a more lifelike presentation, as it greatly improves linearity and bandwidth. The application of Tom Evans' proprietary Lithos regulation means that one is no longer reliant on the amplifier's ability to reject garbage, as this is disposed of long before it reaches any gain stage. Noise is therefore virtually eliminated with the added benefit of increased speed and resolution far in advance of most designs.

Because the gain stage is fully DC coupled to accurately reproduce a wide bandwidth, an added safety feature is a DC detection and isolation circuit. This protects both loudspeakers and DC coupled power amps from potential damage through failure of any source components. This circuit delays power up at 'switch on' for 8 seconds while it checks the system, then remains active at all times during the unit's use, and will immediately isolate the output if DC is detected. This only operates below 3Hz; its presence in the preamp is inaudible.

In addition to the current feedback technology, there are marked echoes of the award winning Groove phono stage (in terms of error correction and the application of psychoacoustic principles) built into the design. The Vibe preamp again moves the goalposts for what is possible in reproducing recorded music.

Add the optional Pulse 2 power supply to the above described Vibe and things get even better. The Pulse 2 is joined to the Vibe through the same multi-pin connector used by the stock power supply, and provides the Vibe preamp with the ultimate in ultra low noise class A regulator technology. The transformer used to power the Pulse is designed and manufactured in house. The sonic benefit of adding The Pulse to The Vibe is an obvious increase in dynamic range and resolution coming from a black background.

Chris Thomas in Hi Fi+ opined that "Even without the Pulse, the Vibe is good enough to be compared to any sub-$17,000 pre out there....But add the Pulse and you are talking of an entirely different level of performance altogether." Shockingly good.

The Pulse power supply is a plug-in power supply substitution to the standard Vibe preamp. No modification to the Vibe is necessary other than disconnecting the stock power supply and replacing it with the Pulse power supply.

Shipping typically 2-3 days
  • 5 pairs of switched line inputs and 1 pair of buffered record outputs
  • 2pairs of outputs to power amplifiers
  • Function switch from 'WASP' manufacturers of battlefield communication technology
  • The DACT switched attenuator used in The Vibe has a tracking accuracy between channels of 0.05 dB, compared with an error of ± 10% from other manufacturers. It comprises an array of surface mount metal film resistors mounted on a gold plated spiral track giving 24 positions. It's main benefits are: minimal distortion over a wide bandwidth, short signal paths, stunning attenuation accuracy figures of 0.05dB between channels.
  • Proprietary 'Lithos' regulation (unique to Tom Evans products) supplying all stages of the circuit
  • Width: 13 inches 
  • Height: 3.5 inches 
  • Depth: 7 inches

UK Delivery

  • FREE delivery via DPD Local 'Next Day' service including one hour delivery window service 'Predict & Follow My Parcel'.
  • Royal Mail '1st Class Recorded' costs between £5.00 - £10.00 on goods with order value under £300, dependent on weight.
  • Saturday or Sunday delivery available upon request for supplemental charge.

EU Delivery

  • £25 delivery charge 'Flat Fee' via DHL Europe by Road service (3-5 days) which provides comprehensive tracking of shipments online.
  • £60 delivery charge 'Flat Fee' via DHL Europe by Air service  (1-2 days) which provides comprehensive tracking of shipments online.

USA & Canada Delivery

  • Services based on your order being shipped to the U.S. and Canada are calculated as follows:
    £100 delivery charge 'Flat Fee' via DHL international 'Day Definite' service per parcel.
    Receiver is responsible for the payment of local Duties and Taxes.

Exceptions

  • Not all products are available for order into Europe, USA & Canada

WARRANTY

  • Full manufacturer's warranty on all new purchases. Standard warranty is typically 2 years with some goods coming with 6 years manufacturer's warranty.
  • Goods purchased in UK and EU are covered by the Consumer Contracts Regulations.

Be the first to Write a Review for this item!

Price Match

If you have seen one of our products cheaper elsewhere, let us know. We will check it out and either match or beat the price. Simply fill in the following form and click 'Submit' to send it to our staff.

Your Name: *
Your Email Address: *
Phone Number: *
Name of cheaper supplier:
Price (inc VAT) at other supplier: *
Web address of the other item: *
Cancel

Ask a Question

Your Name: *
Your Email: *
Phone Number:
Your Question: *
Current System?
Cancel

Speak to an expert 01892 532 995 Mon - Sat 9am - 5.30pm